Microfinishing — walls
with a velvety touch.
Microfinishing is the ultra-fine finish of KCBerry's six-system range — designed for bathroom walls, shower surrounds, accent walls, ceilings and low-traffic floors. Two very thin coats over fibre-reinforced Microbase, protected with a matt or satin water-resistant 2K polyurethane varnish, give a mineral surface that's soft to the touch, 2 to 3 mm thick — no tile, no grout line, no cold joint — available in 73 colours and delivered UK-wide.
Walls, ceilings,
quiet floors.
Microfinishing is recommended wherever the surface needs to feel calm: bathroom walls and shower surrounds, wet-room ceilings, kitchen splashbacks, accent walls, bedroom walls, dressing rooms, hallway ceilings, and low-traffic floors such as bedrooms or home offices. It renovates existing tiled or plastered walls without demolition and finishes new surfaces over Microbase in one continuous mineral surface. Most bathroom projects pair it with Micronoslip on the shower floor, in the same colour, so the wall-to-floor transition disappears.
Microfinishing
versus Microtraffic.
Microtraffic is our everyday floor finish for dry, high-traffic areas — kitchens, hallways, commercial spaces, offices. Microfinishing shares the same 73-colour palette but uses an ultra-fine grain and a softer 2K polyurethane varnish for a velvety, tactile surface designed for walls, ceilings and low-traffic floors. As a rule of thumb: heavy footfall calls for Microtraffic, walls, ceilings and quiet rooms call for Microfinishing. In a bathroom, both can coexist — Microfinishing on the walls, Micronoslip on the shower floor, and Microtraffic on the main floor — matched in the same colour so the transitions disappear.
Two ultra-thin trowelled coats over fibre-reinforced Microbase, 6 to 12 h recoat time, protected with a matt or satin water-resistant 2K polyurethane varnish and ready for use in 5 to 7 days. 5-year guarantee on systems installed by a professional.
Honest, detailed
pricing.
A Microfinishing kit is, in materials alone, in the order of £38 to £65 per m² — materials only, excluding installation. The amount varies according to the colour and varnish chosen. We supply materials: installation is invoiced directly by the installer of your choice, whose rates we don't control.
Every project is priced individually after a short remote conversation about the installation, so the figure you're quoted is the figure you pay. See the full pricing page for a breakdown of tiers, or request a free quote below.
